Jetta JETBOOK 9060 Manual Download Page 83

Page: 83 / 121

If the printer you are setting up:

Is not connected to a network select

Local printer.

Is connected to a network select

Network printer.

Click Next.

The Add Printer Wizard prompts you to select your printer.

From the list of manufacturers end printers, select your printer, then click

Next.

The Add Printer Wizard prompts you for the printer port.

HINT: If your printer is not in the list, see your printer manual or
packaging. The driver may be on a diskette that came with the
printer. If not, it is possible that you can download the driver from
the primer manufacturer's Web site.

Select the port settings according to the instructions in your printer's

documentation and select the port to which your printer is connected, then click

Next.

The Add Printer Wizard prompts you to enter a “friendly” printer name.

Enter a name for your printer.

HINT: If you are using more

than

one printer, make sure the name

is descriptive enough to help you tell the difference.

Summary of Contents for JETBOOK 9060


























































































































Search results

Summary of Contents for JETBOOK 9060

Reviews:

Brands by name

Popular brands

Jetta JETBOOK 9060, Manual

Search results

Summary of Contents for JETBOOK 9060

Reviews:

Brands by name

Popular brands