Jetta JETBOOK 9060, Manual

Page: 23 / 121

Adding memory (Optional memory module)
The Notebook is one SO-DIMM connector (128 MB on board), allow maximum of
192/256/384MB of system memory to be installed. This memory configuration is
achieved by installing one 64MB, 128MB or 256MB 3.3V SDRAM 144-pin
SO-DIMM memory module. Refer to the System Memory Expansion and
Installing Memory Cards sections in Chapter 6 for detailed information on
upgrading system memory. After reviewing the appropriate sections, if you are
not completely confident that you have the skill to install memory modules by
yourself, please consult your notebook dealer or technician.
Installing a memory module
If you are adding memory module after you have started to use the computer,
begin at step 1. Otherwise skip to step 3.
1. If the computer is on, click <Start> .
2. In the Shut Down Windows dialog box, select <Shut Down> , then click <OK> .
Windows Millennium Edition shuts off the computer.
3. Remove all cables connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Remove the Battery.
6. Remove three screws securing the expansion memory cover, then remove
the cover.
7. Plug memory module into the SO-DIMM connector JP20.