manualshive.com logo in svg

Jetta JETBOOK 9060, Manual

Share
Download
Jetta JETBOOK 9060 Manual Download Page 21

 

 

DANGER: To avoid electric shock, do not modify forcibly bend, 
damage, place heavy objects on top of, or apply treat to the power 
cable. If the power cable becomes damaged or the plug overheats, 
discontinue use. 
Never remove the power plug from the outlet with wet hands. 

 

Charging the battery 

Before you can use the battery to power the computer, you must charge it. 
Connect the computer to a live AC outlet using the AC adapter and power cable. 
The on/off light glows green and the green battery light flashes. 

Once the computer is connected to a power outlet, you can charge the battery 
with the computer turned off or on. When the computer is turned off, the battery 
charges about 2.5 hours to full. 

When the computer is turned on and is not consuming full power (under 18W), the 
battery charges about 4.5 hours to full. 

 

 

CAUTION: Once the battery is charged for the first time, avoid leaving 
the computer plugged in and turned off for more than a few hours at a 
time. Continuing to charge a fully charged battery can damage the 
battery 

 

Summary of Contents for JETBOOK 9060


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands