manualshive.com logo in svg

Jetta JETBOOK 9060, Manual

Share
Download
Jetta JETBOOK 9060 Manual Download Page 74

 

Charging the RTC battery 

In addition to the main battery, the computer contains an internal battery for the 
real-time clock (RTC). The RTC battery provides power for the internal real-time 
clock and calendar. 

During normal use, the main battery keeps the RTC battery adequately charged. 
Occasionally, the RTC battery may lose its charge completely, especially if you 
have had the computer turned off and without main battery pack inserted for a 
long time. 

It is seldom necessary to charge the RTC battery because it charges while the 
computer is on. However, if the RTC battery is low, the real-time clock and 
calendar may display the incorrect time and date or stop working. 

To recharge the RTC battery, plug the adapter into system for at least 24 hours. 

The computer can be used while the RTC battery is being charged. Although the 
charging status of the RTC battery cannot be monitored, if the power is on, it takes 
approximately 24 hours to fully charge the RTC battery. 

 

Summary of Contents for JETBOOK 9060


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands