manualshive.com logo in svg

Jetta JETBOOK 9060, Manual

Share
Download
Jetta JETBOOK 9060 Manual Download Page 67

 

Email Detector Application 

This application will monitor your POP3 E-mail server, to see if you have any new 
coming mail in the server. You can set an interval value to connect to the server 
periodly. If it did have new coming mail, it will announce you and act as 
1. POP up a message box, 2. play a sound, or 3. turn on a dedicate LED. 

 

 

Once you have installed the software driver and restart the Windows, an E-mail 
Detector activator icon will appear at Windows Taskbar. Right single-click the 
activator icon to popup a menu with Which you can select the following items; 

Detect Now

: To check if there is any new coming mail on server immediately. 

Configuration…

: To configure your E-mail box information, and other properties 

for detect the email. See the detailed description as below. 

Exit

: To close the E-Mailer Detector application. 

Summary of Contents for JETBOOK 9060


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands