JETI model Duplex DS-16, Manual

Page: 44 / 164

computer radio control system
EN
6 Transmitter Powering ON/OFF
Switching-on is achieved by pressing and holding the „Power“
button . The green LED turns ON and the initial screen appears on (1)
the LCD display. At this point transmitter is waiting for final
confirmation – press the
F5 (Yes) button . After confirmation, the (2)
main screen is displayed and the transmitter is ready. The power-on
status of the DC/DS transmitter is indicated by the lit green LED.
The transmitter is switched-off by pressing the „Power“ main
button. Before complete power-down is achieved you will be asked
for additional confirmation. In case of an emergency, a fast turn-off
can be achieved by simultaneously pressing and holding the
„Power“ and „esc“ buttons. NEVER use this alternative during
normal working conditions.
* If you do not confirm powering-on witinin a certain time limit, the
transmitter will turn off automatically. In the DC/DS transmitter
setup you may disable the confirmation by changing in the setup
menu
„Main menu->System-> Configuration->Fast switch-on“.
(2)
(1)
If you want to find out the battery status on a switched-off
transmitter just push the button „Power“ and the initial screen
with the battery status will appear. If you do not confirm
turning-on, the transmitter will shut down automatically.
During the charging process this function is always activated.
Advice:
6.1 Transmitter Powering-ON
We recommend that you leave the transmitter with the switch-
on confirmation enabled, as this function prevents accidental
turning-on and discharging of the transmitter battery.
Advice:
6.2 Transmitter Turning-OFF
6.3 Transmitter Restart
2. 2.
In case of erratic behavior we recommend that you restart the DC/DS
to reboot the operation system.
1. Standard switch-OFF and ON with main „Power“ button.
2. If necessary, use the Emergency Switch-OFF by simultaneously
pressing and holding the „Power“ and „esc“ buttons.
3. Disconnect and reconnect the transmitter battery connector.
[ Remove the screws that secure the radio back cover. Next, remove a)
the radio back cover , Disconnect the transmitter battery connector, b )
c) d) Press the „Power“ button to discharge the internal capacitors,
Reconnect the transmitter battery, Reconnect transmitter battery e)
pack and reinstall radio back cover and cover screws, Restart the f)
system. ]
43