JETI model Duplex DS-16, Manual

Page: 84 / 164

computer radio control system
EN
9.2.2 Digital trim
Fully programmable digital trims are located right under the
transmitter gimbals as a set of four directional buttons. All
adjustments and step changes are made in the
“Digital Trim” menu.
You can assign different trim ranges and trim steps to every trim
control function.
The trim dialogue has been divided into two You screens, a) and b).
can switch between each of them by using the "F1 Left" and "F2
Right" buttons. The “F3 (Trim)” button switches your desktop
display to the main trim screen where you can instantly observe
your setup changes.
As you can see from the screen , you can assign any function that
a)
will be influenced by that particular trim. It is also possible to
deactivate the trim so that it doesn’t influence any function
(simply
unselect the assigned function) . This is mostly important for pilots of
various multicopters or helicopters equipped with advanced
stabilization electronics.
Special trim functions
Digital trims can be used independently as controls for any function.
It is possible to assign the special functions
"Trim.Ctrl" or
"Trim.RstOn" (Trim – Automatic reset) to any digital trim.
- Trim.Ctrl (Trim control) – enables using a specific trim
independently from model functions. The transmitter remembers
4. 4.
10. Flight mode announcement after flipping a switch
It is possible to assign an arbitrary switch to the flight mode voice
announcement. After switching on, the actual flight mode will be
announced
(the selected WAV file will be played back).
the trim value after shutdown. After pressing the trim button no
superior functions are trimmed, only internal state of trim is
incremented.
- Trim.RstOn (trim control with automatic reset) – enables using
the specific trim independently from model functions. The
transmitter does not remember the value of trim after shutdown.
After loading the model, the trim value is always 0%. In combination
with the logical switches this option is suitable for a sequential
switching between flight modes or playing sound sequences.
The operational modes of the trims have also been extended (see
picture
) . There are currently these options: c)
Global – the specified trim will have equal settings for all flight
modes.
Separate – every flight mode has its own independent
configuration of the trim.
83