JETI model Duplex DS-16, Manual

Page: 53 / 164

computer radio control system
EN
3. 3.
3. Enter the name of your model and press
„F5(OK)“ (Note: you must enter a model
name to proceed.) Then select the model
type „General“. Confirm by pushing the
„F5(Next)“ button.
4. The first item in the „Basic Properties“
menu is the number of motors in the
model. In this example, this item will not be
edited and we will proceed to the second
item, which is how the motor needs to be
controlled – i.e. whether the motor turns
only one direction (Single) or both
directions (Double). Edit the item
„Motor
type“ by selecting „Double direction“.
Press the „F5(Next)“ button to confirm.
5. In the „Function Assignment“ menu
use the „F3(Add)“ button to create all of
your desired functions. Then you can assign
transmitter control switches/sticks to the
functions by editing each function’s
„Control“ item, see chapter: „Select
control input“ . The only exception is the motor sound module
function, which you cannot simply assign to a control switch/stick,
because it wil be controlled by a mixer. The mixer will allow the
motor sound will be played proportionally to the motor speed. For
the siren function you may take advantage of the switch
„Sa“
(spring-loaded switch). After you create all of your desired functions,
press the
„F5(Next)“ button to confirm.
6. The „Servo assignment“ menu displays
the receiver channels and their transmitter
output assignments. The channels are
assigned in the order that you created the
functions in the previous menu. If you want
to change any of the output assignments,
select the channel you want to edit and
reassign its output. Otherways press
„F5(Next)“ to confirm.
7. The screen will display a question which
asks if you really want to create and activate
the new model. Press the
„F5(Yes)“ button
to confirm.
8. The „Servo Setup“ menu is where you
can set all of your servo neutral positions,
servo output throw limits, servo reversing,
delay etc. You should return to this menu
after you have bound your receiver and
transmitter.
See the chapter 8.4: Receiver-
>Binding.
52