JETI model Duplex DS-16, Manual

Page: 132 / 164

computer radio control system
EN
4. 4.
2. Proportional Input Display
The „Display Inputs (1/2)“ screen displays the currently detected
position of each proportional control.
3. Switch Status Display
Press the „F3“ button to show the „View Inputs (2/2)“ screen.
This screen shows the type and currently detected position of the
transmitter’s switches. Use the
„3D control“ to select and edit any
of the displayed switches. The „Sk“ and „Sl“ switch positions are
reserved for the switches that can be mounted into the ends of your
transmitter sticks.
9.6.4 Receiver Output (Servo Monitor)
This menu displays the receiver output channels being generated by
the transmitter. You can press the „F3“ button to see your
programmed receiver output function names and their current
output as a percentage. If you have modified the „Channel Set“ or
„Pin-Out Setting“ of your Duplex receiver then the displayed receiver
output channel numbers may not be accurate. If, however, your
Duplex receiver still has its default channel settings then this list will
be accurate.
9.6.5 System Sound
This menu allows you to assign any available sound file to the system
events.
-Start-Up - associated file is played when the transmitter is turned
on.
131