JETI model Duplex DS-16, Manual

Page: 125 / 164

computer radio control system
EN
4. 4.
(Separate symbol)“ symbol is displayed then the current list of user
blocks are only displayed in the current flight mode. This means that
when you change your flight modes, the desktop display will also
change. When using separates you must create a user block list for
each flight mode. You can change from Global to Separate by
highlighting the first line and pressing the
„3D button“ .
9.4.7 Main Screen
This page displays additional desktop options.
Switches can be used to flip pages on the main screen. You can
assign two separate switches – the first one will always flip to
previous page, the second switch will jump to the following page.
You can also use any of the integrated accelerometer gestures
(DS-
14/ 16 only) to scroll through various telemetry screens.
Telemetry displayed at clock panel
Here is where you can select one telemetry parameter, which will
appear at location of the digital clock on the top bar of the screen.
This way you can select eg. displaying the instant current draw from
the batteries, which is very helpful when balancing different servo
travels.
Setting the display of the telemetry data on the top menu
bar of the screen is saved as a part of the model
configuration and it is displayed again when the
transmitter is switched on. It is possible to select any
simple numerical telemetry value, except GPS
coordinates. Note:
124