IOM J500.32
Jerguson
®
LumaStar
™
2021.05
18
16633 Fol
tz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828
www.clark-
reliance.com ● [email protected]
5. After the lower bracket has been tightened, go back to the top bracket and loosen the thumb nut enough to
allow the cable to slide through freely. Pull cable as tight as possible, and fully tighten thumb nut as shown
in Figure 12.
6. The Jerguson
®
LumaStar
™ is now properly installed. Feel free to tuck any excess cable inside itself or allow
it to hang freely. This adjustable assembly is appropriate for any gauge with a cover width not exceeding
4.375 inches (111 mm).
Figure 12
Figure 13
Figure 14
