IOM J500.32
Jerguson
®
LumaStar
™
2021.05
16
16633 Fol
tz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828
www.clark-
reliance.com ● [email protected]
8. Bracket Installation (All Models)
8.1 Universal Bracket
*NOTE: Illuminators pictured are for reference only. The mounting instructions are the same across all Jerguson
Lumastar
models. Model EPL-316 mounts in the same manner except the power supply is always remote
mounted.
1. Check to make sure brackets are properly assembled on the illuminator. The cable should be fed through
the stud protruding from behind the illuminator, locking in the bracket as shown above in Figure 7. One end
of the cable should be crimped into an oval for pulling leverage and the other should be crimped securely
around a thumb nut.
Figure 6
Figure 7
Figure 8
