For Service Technician Use Only
DIAGNOSTICS & TROUBLESHOOTING
JennAir Built-in Coffee System
n
2-7
Troubleshooting (Continued)
PROBLEMS
POSSIBLE CAUSE
SOLUTION
The appliance requires a third rinse cycle
at the end of descaling
The water tank was not filled to the MAX
level.
Empty the drip tray.
Follow the instructions displayed by the
appliance and perform a third rinse cycle.
The appliance emits noises or small puffs
or steam while not in use
The appliance is ready for use or has been
recently switched OFF.
Condensate is dripping into the vaporizer.
This is normal.
To limit this, empty the drip tray.
