COMPONENT ACCESS
4-22
n
JennAir Built-in Coffee System
Removing the LED and Fan Board
1.
Complete the steps
from
“Removing the Top Panel and
Fan Panel”
.
2.
Complete the steps
from
“Removing the Back Panel and
Side Panel”
.
3.
Remove the two screws securing the plastic cover for the LED
and Fan board. Remove the plastic cover.
4.
Disconnect the harnesses from the LED and Fan board.
5.
Remove the two screws from the PCB in order to disconnect
the board from coffee system.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
