Jeep WRANGLER 2021 Owner'S Manual Download Page 83

Page: 83 / 464

GETTING TO KNOW YOUR VEHICLE

6. From inside the vehicle, pull the handle on

the header latch downward to engage the

hook into its receiver. Repeat on the other

side.

Step Six

7. Pull the handle back upward while squeezing

the hook, locking the latch into place.

Step Seven

Installing The Soft Top Windows

Install The Right And Left Quarter Windows
1. From the rear of the vehicle, guide the top

of the window into the retainer and slide

forward while keeping the window level.

Repeat on the other side.

Step One

2. Place the top of the quarter window pillar

into the top cover, and insert the bottom tab

into the clip.

Step Two

CAUTION!

Failure to follow all Quarter Window Install

steps could result in damage to the Soft Top

or vehicle.

21_JL_OM_EN_USC_t.book Page 81

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Jeep WRANGLER 2021, Owner'S Manual, Page: 83 / 464

Search results

Summary of Contents for WRANGLER 2021

Reviews: