Jeep WRANGLER 2021 Owner'S Manual Download Page 45

Page: 45 / 464

GETTING TO KNOW YOUR VEHICLE

Uconnect 4C/4C NAV With 8.4-inch Display

ASIC

OICE

OMMANDS

The basic Voice Commands below can be given

at any point while using your Uconnect system.
Push the VR button on the steering wheel. After

the beep, say:



“Cancel” to stop a current voice session.



“Help” to hear a list of suggested Voice

Commands.



“Repeat” to listen to the system prompts

again.

Notice the visual cues that inform you of your

Voice Recognition system’s status.

TARTED

The VR button is used to activate /deactivate

your Voice Recognition system.
Helpful hints for using Voice Recognition:



Reduce background noise. Wind noise and

passenger conversations are examples of

noise that may impact recognition.



Speak clearly at a normal pace and volume

while facing straight ahead.



Each time you give a Voice Command, first

push the VR button, wait until after the beep,

then say your Voice Command.



You can interrupt the help message or

system prompts by pushing the VR button

and saying a Voice Command from the

current category.

Uconnect Voice Command Buttons

DDITIONAL

NFORMATION

and Uconnect are registered trademarks and

Mopar Owner Connect is a trademark of FCA US

LLC. Android™ is a trademark of Google Inc.

SiriusXM® and all related marks and logos are

trademarks of SiriusXM® Radio Inc.

page 446.

For Uconnect system support, call

1-877-855-8400 (24 hours a day 7 days a

week) or visit DriveUconnect.com (US) or

DriveUconnect.ca (Canada).

1 — Push To Start Or Answer A Phone Call And

Send Or Receive A Text
2 — Push The Voice Recognition Button To Begin

Radio, Media, And Climate Functions
3 — Push To End Call

21_JL_OM_EN_USC_t.book Page 43

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Jeep WRANGLER 2021, Owner'S Manual, Page: 45 / 464

Search results

Summary of Contents for WRANGLER 2021

Reviews: