Jeep WRANGLER 2021 Owner'S Manual Download Page 87

Page: 87 / 464

GETTING TO KNOW YOUR VEHICLE

NSTALLING

OFT

1. If currently installed, remove the hard top

page 91.

2. Install the door rails, starting with the front,

followed by the rear on each side. For

instructions and appropriate torque specifi

cations for the door rail Torx screws

page 99.

3. Install the rear retainers on each side of the

rear of the vehicle using the provided

#50 Torx head driver and ratchet. Refer to

the table below for recommended torque

specifications.

Step Three

4. Making sure the lift assist mechanism is in

the “lock” position, lift the soft top into the

rear of the vehicle with the side links

pointing toward the front. Lower the lift

assist mechanisms onto its retainers on

both sides (on the inside of the sport bar).

Step Four

CAUTION!

Do not over tighten Torx screws. Damage to

the retainers will occur.

Torque Speci

fication For

Torx Screw

Maximum

Minimum

119.5 in-lbs

150.5 in-lbs

106.2 in-lbs

13.5 N·m

17.0 N·m

12.0 N·m

CAUTION!

Failure to follow the next steps could result in

damage to the Soft Top or vehicle.

21_JL_OM_EN_USC_t.book Page 85

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Jeep WRANGLER 2021, Owner'S Manual, Page: 87 / 464

Search results

Summary of Contents for WRANGLER 2021

Reviews: