Jeep WRANGLER 2021 Page 71 Owner'S Manual Download

Page: 71 / 464

GETTING TO KNOW YOUR VEHICLE

Provided Tools

If your vehicle is equipped with a Dual Top (four

door models only), the soft top system will be

provided in a separate box located in the rear of

the vehicle for shipping purposes only.

OWERING

OFT

NTO

UNRIDER

® P

OSITION

Use this QR code to access your

digital experience.

If the temperature is below 72°F (24°C) and/or

the top has been folded down for a period of

time, the top will appear to have shrunk when

you raise it, making it difficult to put up. This is

caused by a natural contraction of the vinyl or

acrylic materials of the fabric top.
Place the vehicle in a warm area. Pull steadily

on the top fabric. The vinyl will stretch back to its

original size and the top can then be installed. If

the temperature is 41°F (5°C) or below, do not

attempt to put the top down or roll the rear or

side curtains.

1 — #T50 Torx Head Driver
2 — #T40 Torx Head Driver
3 — 15 mm Socket
4 — Ratchet

WARNING!



The fabric quarter windows and fabric top

are designed only for protection against the

elements. Do not rely on them to contain

occupants within the vehicle or to protect

against injury during an accident.

Remember, always wear seat belts.



Make sure hands and fingers are clear of

all pinch points when installing and

removing the soft tops. The lift assist mech

anism and side bows may cause serious

injury if fingers or hands get caught in

between.

CAUTION!

The soft top is not designed to carry any addi

tional loads such as roof racks, spare tires,

building, hunting, or camping supplies, and/

or luggage, etc. Also, it was not designed as a

structural member of the vehicle and, thus,

cannot properly carry any additional loads

other than environmental (rain, snow, etc.).

21_JL_OM_EN_USC_t.book Page 69

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands