Jeep WRANGLER 2021 Page 94 Owner'S Manual Download

Page: 94 / 464

GETTING TO KNOW YOUR VEHICLE

5. Open the swing gate all the way to ensure

clearance of the rear window glass. Lift the

rear window glass.

Step Five

6. Locate the wire harness and washer hose

on the left rear inside corner of the vehicle.

Step Six

7. Release the locking tab by pushing it

downward.

Step Seven

8. To remove the wiring harness, push the tab

inward while pulling downward to

disconnect.

Step Eight

9. To remove the washer hose, push the

release button on hose connector, and pull

downward.

Step Nine

21_JL_OM_EN_USC_t.book Page 92

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands