Jeep WRANGLER 2021 Owner'S Manual Download Page 181

Page: 181 / 464

STARTING AND OPERATING

179

Lane Changing

ACC may not detect a vehicle until it is

completely in the lane in which you are

traveling. In the lane changing example below,

ACC has not yet detected the vehicle changing

lanes and it may not detect the vehicle until it's

too late for the ACC system to take action. ACC

may not detect a vehicle until it is completely in

the lane. There may not be sufficient distance to

the lane-changing vehicle. Always be attentive

and ready to apply the brakes if necessary.

Lane Changing Example

Narrow Vehicles

Some narrow vehicles, such as motorcycles,

traveling near the outer edges of the lane or

merging into the lane are not detected until they

have moved to the center of the lane. There may

not be sufficient distance to the vehicle ahead.

Narrow Vehicle Example

Stationary Objects And Vehicles

ACC does not react to stationary objects and

stationary vehicles. For example, ACC will not

react in situations where the vehicle you are

following exits your lane and the vehicle ahead

is stopped in your lane. Always be attentive and

ready to apply the brakes if necessary.

Stationary Object And Stationary Vehicle Example

PARKSENSE REAR PARK ASSIST — IF

EQUIPPED

The ParkSense Rear Park Assist system

provides visual and audible indications of the

distance between the rear fascia/bumper and a

detected obstacle when backing up (e.g. during

a parking maneuver). For limitations of this

system and recommendations, see

page 183.

ParkSense will retain the last system state

(enabled or disabled) from the last ignition cycle

when the ignition is changed to the ON/RUN

position.

21_JL_OM_EN_USC_t.book Page 179

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Jeep WRANGLER 2021, Owner'S Manual, Page: 181 / 464

Search results

Summary of Contents for WRANGLER 2021

Reviews: