Jeep WRANGLER 2021 Page 228 Owner'S Manual Download

Page: 228 / 464

226

MULTIMEDIA

Feature

Description

Radio/Media

Press the Radio button or Media button to enter Radio Mode/Media

Mode and access the radio functions and external audio sources

page 228.

Phone

Press the Phone button to enter Phone Mode and access the hands-free

phone system

page 241.

Settings

Press the Settings button to access the Uconnect Settings

page 211.

Push the Enter/Browse button on the faceplate to accept a highlighted

selection on the screen. Rotate the Tune/Scroll rotary knob to scroll

through a list or tune a radio station.

Push the Screen Off button on the faceplate to turn the screen on or off.

Push the Mute button on the faceplate to turn the audio of the radio sys

tem off. Push it again to turn the audio back on.

Rotate the rotary knob to adjust the volume. Push the Volume & On/Off

button on the faceplate to turn the system on or off.

NOTE:

Push and hold the Volume & On/Off button for approximately 10 seconds

to reset the radio manually. Doing this can also recover the radio screen

from freezing or being stuck.

Compass

Press the Compass button to access the vehicle’s compass.

Press the More button to access additional options.

21_JL_OM_EN_USC_t.book Page 226

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands