Jeep WRANGLER 2021 Page 385 Owner'S Manual Download

Page: 385 / 464

SERVICING AND MAINTENANCE

383

Wiper Blade Removal/Installation

1. Lift the wiper arm to raise the wiper blade

off of the glass, until the wiper arm is in the

full up position.

Wiper Blade With Release Tab In Locked Position

2. To disengage the wiper blade from the wiper

arm, push the release tab on the wiper

blade and while holding the wiper arm with

one hand, slide the wiper blade down

towards the base of the wiper arm.

Wiper Blade With Release Tab In Unlocked Position

3. With the wiper blade disengaged, remove

the wiper blade from the wiper arm.

4. Gently lower the wiper arm onto the glass.

Installing The Front Wipers
1. Lift the wiper arm off of the glass, until the

wiper arm is in the full up position.

2. Position the wiper blade near the hook on

the tip of the wiper arm.

3. Slide the wiper blade up into the hook on

the wiper arm, latch engagement will be

accompanied by an audible click.

4. Gently lower the wiper blade onto the glass.

Rear Wiper Blade Removal/Installation

1. Open swing gate to access the wiper arm.

Rear Wiper Assembly

CAUTION!

Do not allow the wiper arm to spring back

against the glass without the wiper blade in

place or the glass may be damaged.

1 — Wiper Blade
2 — Wiper Arm
3 — Release Tab

1 — Wiper Blade
2 — Wiper Arm J Hook
3 — J Hook Retainer

1 — Wiper Arm
2 — Wiper Blade

21_JL_OM_EN_USC_t.book Page 383

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands