Jeep Grand Cherokee 2015, Operating Information Manual

Page: 31 / 878

NOTE:
The liftgate passive entry lock button will
only lock the liftgate, the liftgate unlock
feature is built into the electronic liftgate
release. NOTE:
Use the power door LOCK switch on either
front door trim panel or the Remote Keyless
Entry (RKE) transmitter to lock and unlock
the liftgate. The manual door locks on the
doors and the driver’s door lock cylinder will
not lock and unlock the liftgate.
WARNING!
Driving with the liftgate open can allow poi-
sonous exhaust gases into your vehicle. You
and your passengers could be injured by
these fumes. Keep the liftgate closed when
you are operating the vehicle.
Power Liftgate — If Equipped
The power liftgate may be opened
by pushing the electronic liftgate
release (refer to Keyless Enter-N-
Go™ located in Things To Know
Before Starting) or by pushing the
LIFTGATE button on the Remote
Keyless Entry (RKE) transmitter. Push the LIFT-
GATE button on the RKE transmitter twice
within five seconds, to open the power liftgate.
Once the liftgate is open, pushing the button
twice within five seconds a second time will
close the liftgate.
The power liftgate may also be opened or
closed by pushing the LIFTGATE button located
on the left side of the steering wheel on the
instrument panel, or closed by pushing the
LIFTGATE button located on left rear trim panel,
near the liftgate opening. Push the LIFTGATE
button located on left rear trim panel once will
close the liftgate only, this button cannot be
used to open the liftgate.
When the LIFTGATE button on the RKE trans-
mitter is pushed two times, the turn signals will
flash twice to signal that the liftgate is opening
or closing (if Flash Lamps with Lock is enabled
in the Uconnect® settings) and the liftgate
chime will be audible. For further information,
refer to
" Uconnect® " in " Understanding Your
Instrument Panel " .
Liftgate Entry
28