Jeep Grand Cherokee 2015, Operating Information Manual

Page: 274 / 878

7. After the shift is completed and the NEU-
TRAL (N) light stays on, release the NEU-
TRAL (N) button.
8. Start the engine.
9. Shift the transmission into REVERSE.
10. Release the brake pedal for five seconds
and ensure that there is no vehicle move-
ment.
11. Shift the transmission to NEUTRAL.
12. Apply the parking brake.
13. Shift the transmission into PARK, turn the
engine OFF, and remove the key fob.
Repeat steps 1-7 to shift out of NEUTRAL.
Rear Electronic Locker (E-Locker)
System — If Equipped
The Rear E-Locker System features a mechani-
cal locking rear differential to provide better
traction in the 4WD LOW position. The “REAR
LOCK” button is on the Selec-Terrain Knob.
Activating The Rear E-Locker
To activate the Rear E-Locker System, the
following conditions must be met:
1. The 4WD system must be in 4WD LOW.
2. The ignition switch in the ON position and
the engine running.
3. Vehicle speed must be below 15 MPH
(24 km/h).
4. To engage Rear E-Locker, press the REAR
LOCK button once.
Deactivating The Rear E-Locker System
To deactivate the Rear E-Locker System, the
following conditions must be met:
1. Rear E-Locker must be engaged, and the
REAR LOCK indicator light on.
2. The ignition switch in the ON position and
the engine running.
3. To disengage Rear E-Locker, press the
REAR LOCK button once.
NOTE:
•
It may also be necessary to drive slowly
steering back and forth to complete en-
gagement and disengagement of the
E-Locker.
•
When engaging Rear E-Locker, the indi-
cator lights in the instrument cluster and
on the REAR LOCK button will begin to
flash. When the shift is complete the
REAR LOCK indicator lights will remain
on.
Neutral Switch
271