Jeep Grand Cherokee 2015, Operating Information Manual

Page: 395 / 878

Bi-Halogen Headlamps
1. Remove the 3 hex head screws from the
wheel liner.
2. Pull the exterior edge of the liner towards the
tire to gain access to the headlamp bulb cap.
3. Firmly grasp the cap and rotate it counter-
clockwise to unlock it.
4. Firmly grasp the bulb and connector assem-
bly and rotate counterclockwise to remove
from the housing.
5. Disconnect the bulb from the electrical con-
nector and then connect the replacement
bulb.
CAUTION!
Do not touch the new bulb with your fingers.
Oil contamination will severely shorten bulb
life. If the bulb comes in contact with any oily
surface, clean the bulb with rubbing alcohol.
6. Install the bulb and connector assembly into
the headlamp housing and rotate clockwise
to lock it in place.
7. Install the bulb cap in the headlamp housing
and rotate clockwise to lock it in place.
8. Install the 3 hex head screws into the wheel
liner.
Front Turn Signal Lamps
1. Open the hood.
NOTE:
Removal of the air cleaner filter housing
may be necessary prior to replacing bulbs in
the upper lamp assembly on the passenger
side of the vehicle.
2. Twist the bulb and socket assembly counter-
clockwise, and then remove the bulb and
socket assembly from the lamp housing.
3. Pull the bulb out of the socket and insert the
replacement bulb.
4. Install the bulb and socket assembly into the
housing, and rotate the socket clockwise to
lock it in place.
5. Re-install air cleaner filter housing, if removed.
Front Fog Lamp
1. Remove the 3 hex head screws from the
wheel liner.
2. Pull the exterior edge of the liner towards the
tire to gain access to the bulb.
3. Rotate the bulb’s socket counterclockwise,
and remove the bulb and socket assembly
from the fog lamp housing.
4. Pull the bulb out of the socket and insert the
replacement bulb.
392