Jeep Grand Cherokee 2015, Operating Information Manual

Page: 128 / 878

indicator changes from solid green to solid
yellow. At this time torque is applied to the
steering wheel in the opposite direction of the
lane boundary.
•
For example: If approaching the left side of
the lane the steering wheel will turn to the
right.
•
When the LaneSense system senses the
lane has been approached and is in a lane
departure situation, the left thick lane line
flashes yellow (on/off) and the left thin line
remains solid yellow. The LaneSense indica-
tor changes from solid yellow to flashing
yellow. At this time torque is applied to the
steering wheel in the opposite direction of the
lane boundary.
•
For example: If approaching the left side of
the lane the steering wheel will turn to the
right.
NOTE:
The LaneSense system operates with the
similar behavior for a right lane departure.
Changing LaneSense Status
The LaneSense system has settings to adjust
the intensity of the torque warning and the
warning zone sensitivity (early/late) that you
can configure through the Uconnect® system
screen. Refer to “Uconnect® Settings” in “Un-
derstanding Your Instrument Panel” for further
information.
NOTE:
•
When enabled the system operates above
37 mph (60 km/h) and below 112 mph
(180 km/h).
•
Use of the turn signal suppresses the
warnings.
•
The system will not apply torque to the
steering wheel whenever a safety system
engages. (anti-lock brakes, traction con-
trol system, electronic stability control,
forward collision warning, etc.).
Lane Sensed (Solid Yellow Thick Line, Solid
Yellow Thin Line/Solid Yellow Indicator)
Lane Approached (Flashing Yellow Thick Line,
Solid Yellow Thin Line/Flashing Yellow
Indicator)
125