Jeep Grand Cherokee 2015, Operating Information Manual

Page: 166 / 878

Your mobile phone must be designed for Qi
wireless charging, be equipped with an after-
market sleeve or equipped with a back plate
from your mobile phone provider.
The wireless charging pad is equipped with an
anti-slip mat, an adjustable cradle to hold your
mobile phone in place and an LED indicator
light.
NOTE:
Visit DriveUconnect.com for additional in-
formation and for supported mobile phones.
Wireless Charging Pad Operation
To use the wireless charging pad, the coil in
your mobile phone needs to align with the coil in
the charging pad, which is located directly un-
der the Qi logo. Since each mobile phone’s coil
location is different, you may need a few at-
tempts to locate the correct spot for your mobile
phone:
1. Place your mobile phone on the wireless
charging pad, towards the Qi logo, so that
the LED turns red. If the LED does not turn
red, pick up the mobile phone and change
the location.
2. Once the LED transitions from red to flash-
ing green, your mobile phone is correctly
placed and charging.
NOTE:
The mobile phone must be aligned around
the Qi logo for the LED to transition from red
to flashing green.
3. If the LED does not transition from red to
flashing green, and just turns off, pick up
your mobile phone and reposition it on the
charging pad.
4. Adjust the wireless charging pad mobile
phone cradle to hold the mobile phone in
position. The cradle moves by pushing down
on the finger tabs and adjusting the cradle in
or out.
NOTE:
The initial adjustment will only need to be
done once as long as only one mobile phone
is used. If a different mobile phone is used,
the cradle will need to be readjusted.
Mobile Phone Alignment
Adjustable Mobile Phone Charging Pad Cradle
163