Jeep Grand Cherokee 2015, Operating Information Manual

Page: 96 / 878

Daytime Running Lights (DRL) — If
Equipped
The LED Daytime Running Lights will come on
when the engine starts, headlights are off, and
the parking brake is off. The headlight switch
must be used for normal nighttime driving.
NOTE:
If allowed by law in the country in which the
vehicle was purchased the Daytime Running
Lights can be turned on and off using the
Uconnect® System, refer to “Uconnect®
Settings” in “Understanding Your Instru-
ment Panel” for further information.
Lights-On Reminder
If the headlights or parking lights are on after the
ignition is in the OFF position, a chime will
sound to alert the driver when the driver’s door
is opened.
Parking Lighting
To operate the parking lighting, the ignition must
be in the OFF position. Turn the headlight
switch to the “P” position. Then move the mul-
tifunction lever up or down to turn on the left or
right side parking lights.
Front And Rear Fog Lights — If
Equipped
The fog light switches are built into the headlight
switch.
To activate the front fog lights, press the
upper half of the headlight switch. To
turn off the front fog lights, press the
upper half of the headlight switch a second time.
To activate the rear fog lights, press
the lower half of the headlight switch.
To turn off the rear fog lights, press
the lower half of the headlight switch a
second time.
NOTE:
To turn on rear fog lamps the low beam
lamps or front fog lamps must first be active.
An indicator light in the instrument cluster illu-
minates when the fog lights are turned on.
Multifunction Lever
The multifunction lever controls the operation of
the turn signals, headlight beam selection and
passing lights. The multifunction lever is located
on the left side of the steering column.
Multifunction Lever
93