Jeep Grand Cherokee 2015, Operating Information Manual

Page: 243 / 878

13. Driver Temperature Control Down But-
ton (Uconnect® 8.4 Only)
Provides the driver with independent tempera-
ture control. Push the button on the faceplate
for cooler temperature settings or on the touch-
screen, press and slide the button on the touch-
screen temperature bar towards the blue arrow
button on the touchscreen for cooler tempera-
ture settings.
NOTE:
In Sync mode, this button will also automati-
cally adjust the passenger temperature set-
ting at the same time.
14. Driver Temperature Control Up Button
(Uconnect® 8.4 Only)
Provides the driver with independent tempera-
ture control. Push the button on the faceplate
for warmer temperature settings or on the
touchscreen, press and slide the button on the
touchscreen temperature bar towards the red
arrow button on the touchscreen for warmer
temperature settings.
NOTE:
In Sync mode, this button will also automati-
cally adjust the passenger temperature set-
ting at the same time.
15. Temperature Control (Uconnect® 5.0 Only)
Press the temperature button on the touch-
screen to regulate the temperature of the air
inside the passenger compartment. Moving the
temperature bar into the red area, indicates
warmer temperatures. Moving the temperature
bar into the blue area indicates cooler tempera-
tures.
Climate Control Functions
A/C (Air Conditioning)
The Air Conditioning (A/C) button allows the
operator to manually activate or deactivate the
air conditioning system. When the air condition-
ing system is turned on, cool dehumidified air
will flow through the outlets into the cabin. For
improved fuel economy, push the A/C button to
turn off the air conditioning and manually adjust
the blower and airflow mode settings. Also,
make sure to select only Panel, Bi-Level or
Floor modes.
NOTE:
•
If fog or mist appears on the windshield or
side glass, select Defrost mode and ad-
just blower speed if needed.
•
If your air conditioning performance seems
lower than expected, check the front of the
A/C condenser (located in front of the ra-
diator), for an accumulation of dirt or in-
sects. Clean with a gentle water spray from
behind the radiator and through the con-
denser. Fabric front fascia protectors may
reduce airflow to the condenser, reducing
air conditioning performance.
MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press to toggle between MAX A/C and the prior
settings. The button on the touchscreen illumi-
nates when MAX A/C is ON.
In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Push-
ing other settings will cause the MAX A/C
operation to switch to the selected setting and
cause MAX A/C to exit.
240