![background image](http://html1.mh-extra.com/html/jcb/js70/js70_service-manual_3631821256.webp)
79 - 2
Section E
Hydraulics
9803/6020
Section E
79 - 2
Issue 1
Hydraulic Rams
Fault Finding (cont’d)
Item Symptoms
Related Parts
Trouble
Treatment
Packing rubber is perished.
The packing life or hydraulic oil
deterioration and high temperature are
possible reasons.
1
Renew hydraulic oil.
Rod packing
2.
Check the hydraulic oil temperature.
(Buffer ring,
(Below 80° C is advisable).
U-ring)
3
Check if high temperature locally.
Lip is deficient all around.
Renew.
It is possible that abnormally high pressure
is working on the packing.
1
Check the operation pressure, cushion
pressure.
2
Part which is attached to the buffer ring
may be abnormal. Inspect the buffer
ring.
The protrusion of the heel of the
As a rule, renew the rod packing at the
packing is excessive.
same time. (It is desirable to renew parts
1
Piston rod
which are attached to the buffer ring at the
oil leakage
Back up ring
same time).
It is possible that abnormally high pressure
is the cause. Check the same as above
(heel of packing protruding).
Foreign matter is biting into the
Remove the foreign matter.
Wiper ring
lip. The lip is damaged.
There is also other abnormal
Renew.
damage.
Wear is excessive and the clearance
Renew.
with piston rod exceeds the
maximum permissible value.
Bushing
(Refer to maintenance standards
for maximum permissible value.)
Large scratch on the sliding part.
Renew.
Also inspect the piston rod.
Scratches, rust on the seal
Remove scratch, rust with oil stone. If it
Cylinder head
attachment parts.
cannot be repaired, renew the cylinder
head.
Summary of Contents for JS70
Page 65: ......
Page 99: ......
Page 189: ...Section E Section E Hydraulics 9803 6020 Issue 1 33 4 33 4 Control Valves Control Valve 291360...