15
Installing the Card Cleaning Cartridge
The card cleaning cartridge cleans the cards entering the printer and consists of a
cartridge frame and an adhesive roller, which are packed together.
1
Remove the cartridge frame and the adhesive roller from their packaging. Insert the
adhesive roller into the cartridge frame. To avoid contamination, always hold the
frame and the roller by the ends and peel the protective wrapper from the adhesive
roller.
2
Open the printer’s main cover and locate the area where the card cleaning cartridge
will be installed (initially, this area was covered by a warning tape).
3
Locate the slot at the rear of the card cleaning cartridge mounting location.
4
Hold the card cleaning cartridge by the extended ‘handle’ (so the large arrow on the
top is pointing away from you). With the cartridge at about a 30° angle (pointing
downward), insert the lip of the cartridge into the slot, until the cartridge seats
against the back wall.
Then press the front of the cartridge down until it seats all the way down and latches
with an audible ‘click’.
5
Close the printer’s main cover.
SLOT
