25
Note:
For cards thinner than 20 mils (0.51 mm) or thicker than 40 mils (1.02 mm), the
card design must be limited to (1) no more than two 30 mm x 30 mm areas of full colour,
(2) black information (text and barcode, for example) must cover no more than 50% of the
card area, and (3) there must be at least a 5mm unprinted border along all edges.
For cards with thickness between 20 mils (0.51 mm) and 40 mils (1.02 mm), these
restrictions do not apply; full colour printing is permitted edge to edge in both directions.
8
Once you are ready to print, go to the
file
menu and select
.
9
If the printer was not selected as the default printer, go to the file menu, select
setup
and choose
Javelin J330i/m card printer
from the printer names list. Then
close
the
print setup
dialog box.
10
The printer will feed in a card and start printing (the data download time will vary
depending on the complexity of the card design and the processing speed of your
computer).
11
Once the printing job is complete, the card is ejected from the printer.
