Javad Maxor, User Manual

Page: 59 / 142

www.javad.com Maxor User’s Manual 2-25
C O N F I G U R A T I O N
Radio Configuration
12.
On the Identification tab, type Owner information (Figure 2-30).
Figure 2-30. PDL Identification Tab
The Identification screen supplies current information concerning firmware
version, serial number, frequency, and power of the radio modem.
13.
Click the Radio Link tab and set the following parameters depending on the
link rate selected (Table 2-3 and Figure 2-31):
Table 2-3. Parameters for Selected Link Rate
Controls
Link Rate
9600 19200
Channel Select:
–Manual
–Channel TX RX
enable
set channel and frequency as
desired
enable
set channel and frequency as
desired
Modulation Type GMSK 4-Level-FSK
Digisquelch High High
Forward Error Correction disable enable
Scrambling enable enable
Local Address 0 0
Channel Select:
–Manual
–Channel TX RX
enable
set channel and frequency as
desired
enable
set channel and frequency as
desired