Javad Maxor, User Manual

Page: 117 / 142

www.javad.com Maxor User’s Manual 5-9
TR O U B L E S H O O T I N G
Bluetooth Problems
Open COM# port failed: Access is denied.
Causes Solutions
Another application
uses the computer port
dedicated for
connection.
• Close the application, then re-connect.
• Connect the receiver via another, unused computer port.
Problem
After searching for available devices, none are discovered.
Causes Solutions
The receiver is not
receiving power.
• Check that the receiver is getting power and is turned on.
• Check that the power cable is attached to the port
marked “PWR”.
• Unplug the cable, then securely and properly reconnect
it to the receiver.
• If the power cable is damaged, contact your Dealer to
purchase a new cable.
The receiver’s Slot 3 is
turned off.
1.
Connect your receiver and a computer using an RS232
cable (see “Connecting the Maxor and a Computer” on
page 2-8).
2.
Click Configuration->Receiver->General .
3.
In the Turn on/off Slots area, enable the Slot 3 (B)
check box.
Problem
Can see the icon for the receiver’s Bluetooth module on the computer screen, but
cannot connect to it.
Causes Solutions
Device security
settings probably
differ.
• Make sure your Bluetooth enabled devices use the same
security settings.
• See “Bluetooth Module Configuration” on page 2-31,
for details on changing security settings.
Bluetooth module
settings may have
changed.
1.
If you changed settings for your Bluetooth module,
remove it from the list of discovered Bluetooth devices
using the Bluetooth manager program (supplied with
the device used to manage the receiver).
2.
Repeat the search.
Error Message