Javad Maxor, User Manual

Page: 39 / 142

www.javad.com Maxor User’s Manual 2-5
C O N F I G U R A T I O N
Powering the Maxor
PCView User's Manual. The latest copy of this software and the manual can be
downloaded from the JNS website.
To access the tab controlling the power settings of your receiver, take the
following steps:
1.
Connect your receiver and computer. See “Connecting the Maxor and a
Computer” on page 2-8 for this procedure.
2.
Once connected, click Configuration->Receiver .
3.
Select the Power Mode drop-down list to set the desired power source
(Figure 2-2). Current Mode displays the current power source.
Figure 2-2. Select Power Mode
•
Auto – receiver automatically selects the power source.
•
Mix – receiver automatically detects and consumes power from the source
with the largest voltage.
•
Battery A – receiver consumes power from battery A.
•
Battery B – receiver consumes power from battery B.
•
External – receiver uses an external power supply.
4.
Select the Charger Mode drop-down list to set the desired charger mode
(Figure 2-3). Current Mode displays the charging battery: a, b, or none
(off).
Figure 2-3. Select Charger Mode
•
Off – receiver will not charge batteries.
•
Charge A – receiver will charge only battery A.
•
Charge B – receiver will charge only battery B.
•
Auto – receiver will automatically detect and charge both batteries.