Javad Maxor, User Manual

Page: 116 / 142

5-8 Maxor User’s Manual www.javad.com
5
TR O U B L E S H O O T I N G
Bluetooth Problems
Can’t find receiver.
Causes Solutions
The settings for Port B
may have been
changed.
• The settings for Port B are: 115200 baud rate, 8 data
bits, 1 stop bit, no parity, and no handshaking.
• Try enabling RTS/CTS handshaking for Port B. Do not
change other settings.
The corresponding
receiver options may
be disabled or expired.
• See “Checking an OAF” on page 4-11 for details on
checking current options.
• Enable, or prolong, the corresponding receiver options.
Contact your dealer to order an OAF with desired
receiver options.
Error Message
Can’t find Bluetooth.
Causes Solutions
The receiver’s Slot 3 is
turned off.
1.
Connect your receiver and a computer using an RS232
cable (see “Connecting the Maxor and a Computer” on
page 2-8).
2.
Click Configuration->Receiver ->General .
3.
In the Turn on/off Slots area, enable the Slot 3 (B)
check box.
The Bluetooth module
is linked with another
device. Close the connection with the device, then connect to your
receiver.
The Bluetooth
module’s processor is
overloaded.
1.
Put your receiver in Zero Power Mode. See “Zero
Power Mode” on page 4-16 for details.
2.
Press and hold the Reset key for about one second to
return the receiver to normal mode.
3.
Re-connect to the Bluetooth module.
The receiver does not
have a Bluetooth
module. Contact your dealer to purchase a Bluetooth enabled
receiver.
Error Message