Javad Maxor, User Manual, Page: 48 / 142

2-14 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Maxor Configuration
2.
Click the Advanced tab on the Receiver Configuration screen and then click
the Multipath Reduction subtab. Enable the following boxes, and click
Apply (Figure 2-16).
•
Code multipath reduction
•
Carrier multipath reduction
Figure 2-16. Advanced Configuration – Multipath Reduction
3.
Click the Loop Management tab, enable the following boxes, and click
Apply (Figure 2-17).
•
Enable Common Tracking
•
Static Mode (used for static receivers only, disable if using the receiver as
a Rover)
Figure 2-17. Advanced Configuration – Loop Management
4.
Click OK to close the Receiver Configuration screen.