Javad Maxor, User Manual

Page: 44 / 142

2-10 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Connecting the Maxor and a Computer
3.
Continue with Step 1 in “Establishing a PCView Connection” on page 2-10.
Establishing a PCView Connection
PCView is a personal computer software used to manage the various functions
of your receiver. The full range of PCView configuration and function is outside
the scope of this manual. For more information on any of the procedures in this
section or on PCView, refer to the
PCView User's Manual available on the JNS
website.
1.
Once the receiver and a computer are connected, start PCView on your
computer. The PCView main screen displays (Figure 2-9).
Figure 2-9. PCView Main Window
Notice that the lower-left hand corner shows the receiver status as
"Disconnected".
2.
On the Connection Parameters dialog box, select the following parameters
and click Connect :
•
For Bluetooth or RS-232 connections (Figure 2-10)
–Set the Connection mode (Direct).
–Set the port for your computer (typically COM1, COM2 for RS232 connection
and COM3, COM4, etc. for Bluetooth connection) from the Port drop-down list.
–Set the communication rate between the receiver and the computer (usually
115200) from the Baud rate drop-down list.