Javad Maxor, User Manual

Page: 60 / 142

2-26 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Radio Configuration
Figure 2-31. PDL Radio Link Tab
Notice: The Base and internal Maxor (Rover) PDL radios must be
configured with the same Channels, Radio Link
characteristics (except Digisquelch) and Serial Interface
parameters. Typically, Digisquelch is set on High for
Rover and Low for Base station.
14.
Click the Serial Interface tab and set the following parameters (Figure 2-32):
•
Baud Rate - 38400
•
Parity - None
Notice: Parity should always be set to None.
•
Mode - Transparent w/EOT Timeout