Jasic EVO 2.0 EM-160C, Operator'S Manual

Page: 21 / 82

21
CONTROL PANEL - FUNCTIONS
Digital Display
The bottom digital meter as shown below, is used to display the voltage, inductance/arc force and burn
back time.
•
When not welding, the preset value of voltage is displayed. If no operation is performed for a long
time, the default parameters are displayed.
•
When welding, the actual output voltage is displayed. The voltage is displayed by default in all
welding modes.
•
Inductance can be displayed and adjusted when in MIG mode
•
Burn back time will be shown and adjusted when in MIG mode
•
Arc force can be adjusted when in MMA
•
When the product is not working correctly, this display is used to show an error code.
•
In welding engineer mode, the F0 number options will be shown on this display
Bottom parameter adjustment knob and button
This multi functional control knob is used to scroll through the various parameters of the welding
equipment.
Depending on which welding process you have selected, by either pressing
or rotating the control knob this allows the operator to select the required
parameters of that welding process.
•
In MIG mode, rotating this control to welding voltage, welding inductance
and burn back time for configuration.
•
In MMA mode, rotating control knob will adjust and set welding current
and arc force setting.
•
In Lift TIG mode, rotating control knob will adjust and set the welding current.
•
Pressing the control knob will adjust between the parameters, voltage, inductance/arc force and
burn back time.
•
Rotating the knob clockwise increases the selected parameter value, while rotating it counter
clockwise decreases the value.
•
When the adjustment knob is rotated, the adjusted parameter is displayed in the parameter display
along side.
During welding, rotating the adjustment control knob will adjust the selected parameter and these
adjustments will also be noted by the array of green LED
’ s circling the control dial.