Japan Radio Co. JUE-60GX, Instruction Manual

Page: 16 / 150

xiv
CAUTION
Before using, read this instruction manual.
Incorrect operation may cause improper working operation or malfunction.
When a fault has been detected, refer to the “Appendix E”. If it is not improved, turn
OFF and ON the power switch of main unit to reboot. Still it persists, stop operation
and contact the dealer you purchased from.
ADE
（
Above Deck Equipment
）
Do not deliver mechanical shock and/or force, because each unit of your ADE is a
precision instrument. Unwanted shock and force may cause malfunction.
Do not paint the radome.
Painting of the radome may cause a decrease of the communication quality.
BDE
（
Below Deck Equipment
）
Do not set/remove the ADE-BDE cable during power switch is turned on.
It may cause malfunction.
Do not remove the power supply cable before the power source disconnecting
process is completed. It may cause malfunction.
Coaxial Cable and the other cables
Take care not to damage the connectors and the corrosion resistant sheath of
cable. Otherwise, a trouble may occur.
Do not pull the cable by gripping connector plug only.
Otherwise, a trouble may occur.