Japan Radio Co. JUE-60GX, Instruction Manual

Page: 127 / 150

E-7 Appendix E Troubleshooting & FAQ
1
2
3
4
5
6
7
8
9
10
付録
B
付録
D
APP E
付録
M
付録
N
17
18
19
20
21
22
23
24
付録
A
26
27
28
Unit Alarm name Outline Probable cause Confirmation item
STS2 LED
AIM LED
[GPS] Internal GPS
signal reception
error Blocking occurred. The built-in GPS cannot
determine position
information. Confirm
whether blocking state is
entered. If this alarm is
frequently displayed even
after blocking is cleared, the
unit may be faulty.
[IMPACT] Excessive
impact on ADE A strong impact
can be applied to
ADE for a long
time.
Since a strong impact is
applied to ADE for a long
time, mechanical failure
possibility is increasing.
Check the ADE installation
by referring to "E.6 Problem
related to vibration and
impact " in this manual and
"Appendix D Precautions for
ADE equipment" and "2.2.2
Recommended prop
example" in the installation
manual.
ST3 LED
CM [COMM_CM] CM
communication
error Unit reboot due to
automatic
upgrade Since CM is rebooted when
it is automatically upgraded
from SAS, a CM
communication error
temporarily occurs.
If this alarm is displayed
frequently or for an
extended period of time, the
unit may be faulty.
Unit is reset.
ST4 LED
BUC [COMM_BUC] BUC
communication
error Unit reboot due to
automatic
upgrade Since BUC is rebooted
when it is automatically
upgraded from SAS, a BUC
communication error
temporarily occurs.
If this alarm is displayed
frequently or for an
extended period of time, the
unit may be faulty.
Unit is reset.
Communication
error due to poor
contact Confirm the coaxial cable
connection.
[LOUNLOCK] Local oscillator
unlock Poor contact of
coaxial cable for
transmission Confirm the connection of
coaxial cable for
transmission.