Japan Radio Co. JUE-60GX Instruction Manual Download Page 124

Page: 124 / 150

Appendix E Troubleshooting & FAQ

E-4

Question description

Probable cause

Confirmation item

Reception signal intensity is
weak.

Blocking is occurring. Confirm whether there is a shield between

the antenna and the satellite.
If there is a shield, wait until the ship moves
and the shield disappears between the
antenna and the satellite.

Rain attenuation is
occurring.

Confirm the weather around the ship.
If rain falls heavily, wait until the weather
becomes clear.

Reception signal intensity
changes.

Frequency switch
occurred.

The reception signal intensity may change
due to GSC and DVB-S2 frequency switch.
This symptom is normal operation.

Handover occurred.

The reception signal intensity may change
due to spot beam hand handover (switch).
This symptom is normal operation.

Blocking is occurring. Confirm whether there is shield between the

antenna and the satellite.
If there is a shield, wait until the ship moves
and the shield disappears between the
antenna and the satellite.

Rain attenuation is
occurring.

Confirm the weather around the ship.
If rain falls heavily, wait until the weather
becomes clear.

The satellite tracking is
unstable.

STS1 to STS4 LEDs light in
red blinking faster
occasionally

Excessive vibration
and impact on ADE.

Refer to “Appendix E.6 Problem related to
vibration and impact”

Summary of Contents for JUE-60GX























































































































































Search results

Summary of Contents for JUE-60GX

Reviews:

Related manuals for JUE-60GX

Brands by name

Popular brands

Japan Radio Co. JUE-60GX, Instruction Manual

Search results

Summary of Contents for JUE-60GX

Reviews:

Related manuals for JUE-60GX

Brands by name

Popular brands