Japan Radio Co. JUE-60GX, Instruction Manual, Page: 101 / 150

6-1 Section 6 Maintenance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Section 6 Maintenance
The life of the JUE-60GX depends on how well the equipment is maintained. Check the following items
from time to time to ensure the best performance of your JUE-60GX.
1) Keep the input voltage within the specified range (90 VAC to 264 VAC).
2) Record the BIM current, BUC transmit power and AIM receiving level once at the normal condition.
During the operation, compare level with the recorded normal values. This deed helps you to
remove a fault before it develops into a serious one.
Daily maintenance
The following table shows daily maintenance with general tools.
WARNING
Do not troubleshoot or repair the internal equipment of the JUE-60GX by
yourself.
Any electrical work by any person other than our trained maintenance staff may
cause fire or abnormal operation of this equipment or electrical shock for you.
This equipment meets the technical standard of the Ministry of Internal affairs
and Communications.
Do not adjust the internal circuit without a calibrated measuring instrument or
exchange the parts because the internal circuit has been adjusted finely to
specifications. If the equipment works abnormally, please contact the
purchasing dealer.
No. Item Maintenance
1 Cleaning Clean the panel, switch, top cover, and the button cover with a soft cloth.
2 Fastening Fasten the loose screw, nut, switch, and the connector.
3 Cleaning Vacuum the dust of panel by cleaner at fixed intervals.
NOTE
Please send Installation Report (prepared by your agency) to JRC office to enable your
warranty.