86
UMG 96RM-E
Service and maintenance
The device is subjected to several different safety tests
before leaving the factory and is labelled with a seal.
If a device is opened then the safety checks must
be repeated. Warranty claims will only be accepted
if the device is unopened.
Repair and calibration
Repair work and calibration can be carried out
by the manufacturer only.
Front film
The front film can be cleaned with a soft cloth
and standard household cleaning agent. Do not use
acids and products containing acid for cleaning.
Disposal
The UMG 96RM can be reused or recycled as electronic
scrap in accordance with the legal provisions.
The permanently installed lithium battery must
be disposed of separately.
Service
Should questions arise, which are not described
in this manual, please contact the manufacturer directly.
We will need the following information from you
to answer any questions:
- Device name (see rating plate),
- Serial number (see rating plate),
- Software release (see measured value display),
- Measuring-circuit voltage and power supply voltage,
- Precise description of the error.
Device calibration
The devices are calibrated by the manufacturer
at the factory - it is not necessary to recalibrate
the device providing that the environmental conditions
are complied with.
Calibration intervals
It is recommended to have a new calibration carried out
by the manufacturer or an accredited laboratory every
5 years approximately.
Summary of Contents for UMG 96 RM-E
Page 121: ...121 UMG 96RM E...
Page 126: ...126 UMG 96RM E...
