59
UMG 96RM-E
User password (Addr. 050)
A user password can be programmed to prevent
accidental change of the programming data. Changes
in the programming menu below can only be made after
entering the correct user password.
User password is not factory-programmed. In this case,
the password menu is skipped and you get directly
to the current transformer menu.
If a user password was programmed, the password
menu appears on the display with the indication „000“.
The first digit of the user password is flashing and can be
changed by pressing button 2. Press button 1 to select
the next digit while it is flashing.
You can only get to the current transformer programming
menu after entering the correct code.
Forgot my password
If you do not remember your password, you can only
delete it using the GridVis PC software.
In order to do so, connect the UMG96RM-E to the PC
with a suitable interface. More information can be found
in the GridVis assistant.
MODBUS gateway (Addr. 002)
Set address 002 as described in the table below to use
the UMG 96RM-E Modbus Gateway function:
Setting
Baud rate
0
Modbus Gateway disabled (OFF)
(Factory setting)
1
Modbus Gateway enabled (ON)
Summary of Contents for UMG 96 RM-E
Page 121: ...121 UMG 96RM E...
Page 126: ...126 UMG 96RM E...