![background image](http://html1.mh-extra.com/html/jai/viscam-1000-system/viscam-1000-system_installation-manual_3216691057.webp)
Appendix E
51
VISCAM 1000 Systems
NOTE: this mode
stops
normal image output over TCP and FTP.
Not for use on systems already in production. It should only be
used during initial setup for adjusting focus.
“
One
”:
Wait for a single Ethernet or HW TTL trigger. Snapshot a single
image as soon as the next trigger is received.
“
All
”:
Continuously wait for Ethernet or HW TTL trigger. Display images
as soon as the trigger is received. Click “Freeze” to stop this
operation.
“Last”:
Same as “All”, except that the software displays the last image
captured as soon as “Last” button is clicked.
“Freeze”:
Stop sending UDP images (see item #3 below)
NOTE: Flash is disabled in Live mode.
UDP image is sent to the single client who sends the last command (Snap, Live, One, All, Last). No
duplicated image is sent to other clients. However, please note that while this TEST PORT is activated, the
camera does not send images to the FTP server or JAI ImageServer, and therefore, the normal transaction
halts.
3. TCP image (CONTROL PORT)
If “Freeze” button is selected, the camera stops sending UDP images (TEST PORT), and therefore, the
camera sends TCP images via CONTROL PORT, and/or FTP images to FTP server.
If you want to receive the TCP image in the ENSetup software, make sure to select “Use TCP/IP” under
View menu. Select “Freeze” button.
Whenever the camera receives the next trigger, whether this is Ethernet trigger or TTL trigger, or whether
this is from Lane controller or from ENSetup software (“Eth Trigger” or “Rep. Trigger” button), the camera
captures the image and sends to all clients, which are both lane controller and ENSetup software.
Same image is sent to FTP server as well.
If you wish to monitor the image of the camera outside of camera’s subnet, the router may block the UDP
image. Using this TCP image, the ENSetup software can receive image even if your host PC is outside of the
router or camera’s subnet.