![background image](http://html1.mh-extra.com/html/jai/viscam-1000-system/viscam-1000-system_installation-manual_3216691024.webp)
VISCAM 1000 Systems
18
System Set-Up
Pan the camera mount until the plate is centered under the default position of the vertical line in the middle
of the “Roll Bar” display. The vertical line in the Roll Bar is in the center of the camera field of view. You can
use this feature to ensure the camera is properly aimed at the center of the lane. Securely tighten the pan
adjustment bolt.
Switch back to the “Tilt Line” display. Tilt the camera mount until the plate is positioned just above the tilt
line. Re-adjust the zoom and focus as necessary until the plate just fits in between the vertical markers on the
“Tilt Line”. Changing zoom usually requires that the tilt adjustment be modified also. Do not tighten the Tilt
bolts until after the final lens adjustment. See Figure 19.
Figure 19.
Readjustment of camera tilt and zoom display
The camera mount and lens are now ready for final adjustment.