![background image](http://html1.mh-extra.com/html/jai/viscam-1000-system/viscam-1000-system_installation-manual_3216691029.webp)
System Set-Up
23
VISCAM 1000 Systems
Note
: Older version of EN Setup has incorrect Alarm Status options for TNL-50. The correct setting should be
“Normally High, Low -> Alarm …” Also the Flash Status Type setting of IO Board needs to be set to TNF DC;
please see Appendix A.
Figure 24.
TNL-50 Flash settings context menu in ENSetup
This opens the settings dialog shown below:
Figure 25.
TNL-50 Flash settings dialog