![background image](http://html1.mh-extra.com/html/jai/viscam-1000-system/viscam-1000-system_installation-manual_3216691053.webp)
Appendix C
47
VISCAM 1000 Systems
Figure 47.
Connect TNF-35 AC wires to terminal block X5 on I/O Board
Table 8
TNF-35 flash unit connection (AC) in VISCAM 1000.
Pin X5
Signal
Description
Connection to
1
I/O Gnd
IO Board Gnd
Pin 2 when no power is available from the flash
(see Figure 47)
2
Gnd
Flash Gnd
Flash ground (negative power terminal) (GROUND)
3
Out
Strobe out
Strobe input on flash unit (STROBE OUT)
4
Stat
Strobe status
Status output from flash unit (STROBE STATUS)
5
FPWR
Flash power
Power from I/O Board to output circuit on I/O
Board (pin 6)
6
24V
IO board 24V (Fused 0.5A)
Pin 5 when no power is available from the flash
(see Figure 47)